# Neural Amp Modeller help

**URL:** https://forum.troygrady.com/t/neural-amp-modeller-help/95052
**Category:** Gear
**Created:** [February 21, 2026, 10:23am UTC](https://forum.troygrady.com/t/neural-amp-modeller-help/95052 "2026-02-21T10:23:56Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![ShadowoftheSun](https://forum.troygrady.com/letter_avatar_proxy/v4/letter/s/977dab/32.png) [@ShadowoftheSun](https://forum.troygrady.com/u/ShadowoftheSun)
#### Post date: [February 21, 2026, 10:23am UTC](https://forum.troygrady.com/t/neural-amp-modeller-help/95052/1 "2026-02-21T10:23:56Z")

</div>

Morning folks.

I’ve got a guitar, I’ve got a digital audio interface, and I’ve got a cable to connect the two, so theoretically I’ve got a lot of access to different tones, recording stuff for practice, etc.

What I don’t have is any idea about how to use the digital audio interface with Neural Amp Modeller, or a DAW, or even how to get a sound with less than 500 milliseconds latency. Hell, I can’t even get NAM to output through my computer speakers while using the ASIO sound system.

In short, I am lost, and while I could experiment and try to figure this all out, I’m also disabled and that would involve an amount of mental effort that I don’t think I can sustain.

Does anyone here know how to use NAM to get an okay practice tone with a decent latency? Because if you do, I would love to know.

---

<div class="post-metadata">

### Author: ![aliendough](https://forum.troygrady.com/user_avatar/forum.troygrady.com/aliendough/32/716_2.png) [@aliendough](https://forum.troygrady.com/u/aliendough)
#### Post date: [February 21, 2026, 6:34pm UTC](https://forum.troygrady.com/t/neural-amp-modeller-help/95052/2 "2026-02-21T18:34:36Z")

</div>

What OS are you using and what DAW are you using?

---

<div class="post-metadata">

### Author: ![ShadowoftheSun](https://forum.troygrady.com/letter_avatar_proxy/v4/letter/s/977dab/32.png) [@ShadowoftheSun](https://forum.troygrady.com/u/ShadowoftheSun)
#### Post date: [February 21, 2026, 11:01pm UTC](https://forum.troygrady.com/t/neural-amp-modeller-help/95052/3 "2026-02-21T23:01:52Z")

</div>

I’m on Windows 10, and the DAW I’m currently using is Reaper. The DAI is a Volt 2, if that matters.

---

<div class="post-metadata">

### Author: ![steve506](https://forum.troygrady.com/letter_avatar_proxy/v4/letter/s/e5b9ba/32.png) [@steve506](https://forum.troygrady.com/u/steve506)
#### Post date: [February 22, 2026, 10:29pm UTC](https://forum.troygrady.com/t/neural-amp-modeller-help/95052/4 "2026-02-22T22:29:04Z")

</div>

I suggest starting with the most basic configuration. Something like this:

[![](https://img.youtube.com/vi/I2Up0b9wufU/maxresdefault.jpg "How to Record Audio in Reaper? Quick Tutorial") ](https://www.youtube.com/watch?v=I2Up0b9wufU)

From the video, you can replace “microphone” with “guitar” and follow the same steps.