Extreme Metal Update! Four new lessons

There’s also a huge boutique market for HM2 clones now, some with all sorts of extra EQ and blend controls. I have and have used a few of them, but I tend to eventually keep going back to the BOSS og (I’ve got the waza craft one currently).

I honestly think it’s great that this legendary death metal tone was the result of a teenage kid in Sweden going “look how over the top this thing sounds when I set all the knobs on 10.”

2 Likes

Not only Swede-death but Shoegazers like it too.

2 Likes

It’s also great for that classic Bluegrass sound :grin:

1 Like

I don’t know what happened to my original one from High School. We probably sold it at a garage sale or something. A little bummed about that. But I re-bought a used original one ten or twelve years ago for filming, which I still have.

I saw that they reissued the Waza one, which again, blows my mind. A high-end recreation of a low-end thing!

1 Like

A friend of mine who plays in indie bands asked to borrow an overdrive for a show. So I thought, I’m supposed to know guitars, I’ll give him my Tumnus – the Klon clone. Then he can show up and look like a real insider. I had no idea I could (or should) have just given him the HM2.

1 Like

It’s actually underrated as a mid gain OD imo. Part of what makes the swedish buzzsaw tone is the filter.
Especially on the treble side it has a very unique EQ spectrum. It’s kinda like how Josh Scott discovered that Bad Monkey pedal can do klon tones hahaha.

Part of the waza benefit is it has a mode that lowers the noise floor since people use them dimed and they aren’t particularly quiet circuits, no idea how the 90s bands managed this pre noise gates becoming ubiquitous. Boss/Roland actively understands how people are using them.

The funniest part of all this to me is At the Gates famous Slaughter of the Soul tone is HM-2 and Metal Zone. And there are now waza versions of both.

1 Like

i read this and Blinded By Fear immediately started playing in my head. You monster.

2 Likes

I get the My Bloody Valentine usage – it’s aggressive but not in an ice picky way, more like an odd-order harmonics way. It’s exactly the opposite of the brown sound that I really wanted, which is why I didn’t like it back in the day. But I get why it might work for a band located toward more of the indie end of the spectrum.

The Slaughter of the Soul example I don’t like as much. To me that sounds like a mix which would be improved by a more hi-fi high gain sound, with better bass control and smoother overdrive. It’s not power chords like the Valentine example, it’s articulate riffs. And you can’t really hear what’s going on in the single notes with that tone – especially in the unaccompanied parts.

1 Like

Yeah this is why a lot of the boutique clones have blend knobs, it allows you to just add in some of that tone while still retaining definition. I know for a fact that Entombed ran a DS-1 pedal up the center of the mix to add clarity to the riffs. My band quad tracks with two sets of HM2 and two sets of no-HM2, again to add clarity. I think Dismember just did the HM2 with all knobs on 10 and what you get is this:

Also @Dissonant_Timbres theres a clue to how they controlled the massive feedback from all that gain during the bridge of this tune.

2 Likes

2 posts were split to a new topic: RDT technique in extreme metal

Can’t believe I missed the HM2 convo and all the “core” bands talk, also didn’t expect Troy to bring up Underoath or My Chemical Romance.

1 Like

Which reminds me, Underoath just released a new album I need to check out!

I like the take the folks from Does it Doom went with.

All the controls maxed with a single knob for the distortion control and an internal trimmer for level.

Haha yeah I’ve seen the single knob ones. I have a Lone Wolf Audio Left Hand Wrath Deluxe which is like the polar opposite - more knobs than you’ll know what to do with :laughing:

Another fun one that’s pretty inexpensive is the TC Electronic Eyemaster (they even bothered to name it after an Entombed song). That’s only two knobs - volume and gain.

Really the “chainsaw” sound is a result of the EQ curve when the “color mix” controls are dimed, and more specifically, the H knob. I’ve run the HM2 with the gain dialed way back to increase clarity, almost exclusively running it like an EQ pedal and it still gets that tone.

1 Like

Few know this…

1 Like