So, I posted my first video yesterday using my own cheap ‘n’ cheerful Magnet alternative. Although I did actually by the plans for the magnet a while back the cost of getting someone to make the form for me killed the idea. I ended up making this alternative for exactly £0 as I had everything I needed lying around. It is far from perfect but it did the job this time. I plan to improve it slightly by jointing two clamps together to significantly improve the stability and will make the over hang below the clamp bar smaller to give better camera clearance.
9 Likes
I’ve got a few of those clamps around the house too!!
You can’t go wrong with those although they aren’t the most secure on their own. I plan to join two together for added stability later this week.
I made the big ugly wooden bit because the only magnet I had lying around was the mobile phone dashboard holder and needed a big hole. I plan to pickup some magnets with screw holes this week and mount them directly onto the clamp bar too. Should be a much better solution.
1 Like
Cool. Let me know how well it sticks to the electric and if you think its stable enough for a heavier Galaxy Note phone.
Works great! Brilliant on the acoustic and works well on the electric. Only thing problem factor would be flat surface area on your guitars. Works fine on my superstrats but anything archtop or with a pickguard in the way won’t work. This one has a clamp that makes the suction really tight so I don’t see weight being an issue. There are probably a hundred of these clips on Amazon so I would measure your phone and see what’s out there.
Test clip on my San Dimas
1 Like
Is this the one from the link above? I know there are a slew of these things out there.
Ill try and track down the link to what I got. The one in your first post looks like more of a cradle, like you’re supposed to use it to read music or tab while playing or something. Mine is more of a spring-loaded clamp. To hold your phone on the inside of your windshield for GPS while driving, sorta thing
1 Like
ok, I got mine today. It works and suction isnt a problem with heavy phones. The only issue I have is that it bounces a lot when I pick up speed. Maybe that is just a problem with having a heavy phone, or maybe because my technique requires a lot of movement.
Maybe you’ll have better luck if you attach it to your desk and just turn it around so you get a down-the-neck view.
Hey guys I found a solution for under $10. A Dewalt clamp and two little clamps. It’s a bit fiddly getting the phone in the right place but then it works fine. Here is a pic.
5 Likes
Is that a magnetic base on there too?
It is. however, I have significantly simplified it since then. It is now just the clamp with the magnets attached directly. Less hassle and works even better.
I just took the magnets out of the phone mount because I didn’t have any others lying around but any two magnets should work fine. The Phone mount also has a little metal plate that goes inside your phone case for the magnets to stick to. Any piece of thin metal should work
1 Like
Looks like the magnets are tall enough that the phone clears the trigger part of the clamp…
This is awesome. Do you think this would work for a heavier phone, like a Galaxy Note?
I don’t see why not. I suppose you might need slightly bigger magnets if anything but in principle it should be fine.
@Brendan and @Troy, is Gumroad still the place to buy the Magnet plans, or are they available directly through troygrady.com somewhere?
Yep still via Gumroad for now! Link here: https://troygrady.com/magnet/
We’ll probably get it somewhere on troygrady.com eventually, we just haven’t yet made a way to manage downloads with arbitrary files (e.g. PDFs only) since this is really the only thing we have that’s not videos or zip files of clips / tabs.
Love the creativity by folks here!
1 Like
Just seen this vid by Levi Clay:
A company has made 3D printed magnet type thing already made. Haven’t watched the whole thing, but it seems to be less elegantly designed than the ctc magnet and judging by the comments it is around 200 dollars. So not particularly cheap, but if you got the money and can’t be bothered to get the magnet parts and assemble, it might be the very thing!
1 Like